Nexloa Leather Hole Punch — 6 Interchangeable Sizes (+ Free Beginner Guide)
Make clean, even holes in leather — and get a clean result while you're learning. This is an adjustable punch built for hand leatherwork: press it down and it cuts a clean hole, with six screw-in tip sizes for different projects. A simple tool that does one job well — and it comes with a free beginner guide, so you're not starting from scratch.
| Tip sizes | 6 screw-in tips — approx. 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm |
| Best on leather | around 1–4 mm thick |
| In the box | the punch + 6 tips + free digital guide |
| Shipping | tracked, about 7–20 days |
Tip sizes are approximate — small variations of a few tenths of a millimetre are normal on hand tools.
Why this punch
- Six sizes in one tool. Screw-in tips from roughly 1.5 mm to 4 mm cover most stitching holes, straps and hardware. Swap them in a few seconds.
- Press, don't hammer. It cuts with downward pressure, so you can work at a table — no mallet or pounding block needed.
- Self-clearing channel. Cut-out pieces push up and out instead of clogging the tip.
- Free beginner guide included. A step-by-step PDF that takes you through your first project — a hand-stitched card holder — from cutting to finishing.
What's included
- 1 × adjustable leather hole punch (black & gold)
- 6 × screw-in tips — approx. 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm (one comes fitted on the tool)
- 1 × storage box for the tips
- 1 × digital “Getting Started” guide — sent to your email after purchase
Our product photos are styled presentations — the item you receive is the same tool, but the setting and arrangement shown are for presentation only.
How it works
- Screw in the tip size you need.
- Line the punch up on your marked stitch line.
- Press straight down for a clean hole. Move along and repeat.
Good to know
A few things worth knowing:
- It works best on leather roughly 1–4 mm thick.
- Tip sizes are approximate — a hand tool can vary by a few tenths of a millimetre from the stated size.
- Leather and thread aren't included — this listing is the punch (plus the guide). If you'd prefer the tools together in one box, take a look at our starter kit.
- It's a hand tool: wipe it clean and store it dry to keep the tips sharp.
Who it's for
Beginners getting into leatherwork, and hobbyists who want a simple, adjustable punch for wallets, belts, card holders and small repairs.
Shipping
Orders are prepared and shipped through our fulfilment partner, with tracking. Typical delivery is about 7–20 days depending on where you are. We'll email your guide right after you order, so you can start reading while the punch is on its way.
From us to you
Nexloa is a small, new shop — so you won't find many reviews here yet. What we can offer is a tool that does its job and a guide written to get you through your first piece. Any questions, before or after buying? Send us a message through our contact form and a real person will get back to you.
FAQ
Is this good for a complete beginner?
Yes — that's exactly who the included guide is written for. It starts from the very first step, so no prior experience is needed.
What sizes are the tips?
Six interchangeable tips, approximately 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm — enough for most stitching holes, straps and hardware. As with most hand tools, the exact size can vary by a few tenths of a millimetre.
What leather thickness does it handle?
It works best on leather around 1–4 mm thick, which covers most beginner projects like card holders, wallets and belts.
Do I need anything else to get started?
You'll need some leather and thread. If you'd rather have the tools together in one box, see our starter kit.
How long does shipping take?
About 7–20 days with tracking, depending on your location. We send the digital guide by email straight away.
Can the tips be replaced?
Yes — the tips screw in and out, so you can swap sizes or replace one as it wears.
From flat leather to finished piece
Mark & punch
Pick a size, mark your line, and press straight down for clean, even holes.
Saddle stitch
Sew with two needles through each hole — the strong, classic leather stitch.
Finish the edges
Bevel and burnish for a smooth, tidy edge. Your piece is done.
More than just the tool
A small shop that actually answers
We're just starting out, so if a question comes up before or after you buy, email contact@nexloa.com — a real person reads every message and will help you get your first piece right.